KWP2 support piece

KWW1 “foot” together with KWP2 support piece are used to strengthen subframe resistance to lateral forces and stiffen the system. They are used for greater outreaches and horizontal structure layout.

KWRW profile

KWRW profile is used to hang cladding panels. Continuous bars are fixed directly to the wall (interiors) or to vertical profiles (exteriors). Smaller pieces of the same profile are fixed to the cladding panel but are rotated by 180 degrees. Socket in the upper part of the profile is used for a nut that together … Czytaj więcej

KW4 PAS passive bracket

BSP KW4 PAS passive bracket has been designed with stricter regulations regarding thermal insulation parameter of exterior partitions in mind. Brackets have structural function and transfer vertical and horizontal loads to the main bearing structure of a building. KW4 PAS specially designed shape and materials used in production result in relatively high load capacity and … Czytaj więcej

KW1 PAS passive bracket

BSP passive brackets have been designed with stricter regulations regarding thermal insulation parameter of exterior partitions in mind. Brackets have structural function and transfer vertical and horizontal loads to the main bearing structure of a building. Specially designed shape and materials used in production result in relatively high load capacity and favourable thermal parameters at … Czytaj więcej

KWW1 foot

KWW1 foot together with KWP2 element are a set used to improve brackets resistance to lateral forces and stiffen the assembly. It is sued for greater outreaches and horizontal substructure layout.

KWP1 extension piece

KWP1 extension piece is used to level the surface of the facade in case of unevennesses. Only one size of brackets can be used which has very positive impact on the logistics process. The main purpose of this element is to extend the outreach if even the longest BSP bracket is not sufficient.

KWR2 profile

KWR2 L profile is used to support middle part of the cladding panel. It is our standard element and one of the stiffest L profiles. The adjustment is possible in 50 mm range which helps to deal with concrete unevennesses. Its 70 mm long “leg” and 2 mm thick walls increase the stiffness and allow … Czytaj więcej

KWR1 profile

KWR1 T profile is used at the connection of cladding panels. It is our standard element and one of the stiffest T profiles. The adjustment is possible in 50 mm range which helps to deal with concrete unevennesses. Its 70 mm long “leg” and 2 mm thick walls increase the stiffness and allow for greater … Czytaj więcej

KW1 bracket

KW1 bracket is a standard element and base for most of our systems. It has been designed in order to make installation easier as well as make the adjustment of the profiles possible in all three directions, what helps in dealing with unevennesses of concrete. Small “heel” at the side of brackets base increases its … Czytaj więcej