KWP2 support piece

KWW1 “foot” together with KWP2 support piece are used to strengthen subframe resistance to lateral forces and stiffen the system. They are used for greater outreaches and horizontal structure layout.

KWR8 profile

KWR8 is a T profile used at the connection of two cladding panels. It is part of an interior subframe system. Smaller dimensions result in more cost effective solution. Resistance and stiffness are high enough to be used for fixing interior panels, where horizontal loads loads are not that strong. It is usually sed together … Czytaj więcej

KWR5 profile

KWR5 is an L profile used to support middle section of a cladding panel. It is part of an interior subframe system. Smaller dimensions result in more cost effective solution. Resistance and stiffness are high enough to be used for fixing interior panels, where horizontal loads loads are not that strong. It is usually sed together … Czytaj więcej

KWW1 foot

KWW1 foot together with KWP2 element are a set used to improve brackets resistance to lateral forces and stiffen the assembly. It is sued for greater outreaches and horizontal substructure layout.

KWP1 extension piece

KWP1 extension piece is used to level the surface of the facade in case of unevennesses. Only one size of brackets can be used which has very positive impact on the logistics process. The main purpose of this element is to extend the outreach if even the longest BSP bracket is not sufficient.

KW1 bracket

KW1 bracket is a standard element and base for most of our systems. It has been designed in order to make installation easier as well as make the adjustment of the profiles possible in all three directions, what helps in dealing with unevennesses of concrete. Small “heel” at the side of brackets base increases its … Czytaj więcej