RW2F profile

RW2F is a top hat profile designed for short outreaches. It is fixed directly to the buildings structure, which due to lack of brackets results in lower cost of subframe. It can also be used as a second horizontal layer fixed to vertical L and T profiles for narrow cladding panels.

RW2D profile

RW2D is a top hat profile designed for short outreaches. It is fixed directly to the buildings structure, which due to lack of brackets results in lower cost of subframe. It can also be used as a second horizontal layer fixed to vertical L and T profiles for narrow cladding panels.

RW2C profile

RW2C is a top hat profile designed for short outreaches. It is fixed directly to the buildings structure, which due to lack of brackets results in lower cost of subframe. It can also be used as a second horizontal layer fixed to vertical L and T profiles for narrow cladding panels.

RW2B profile

RW2B is a top hat profile designed for short outreaches. It is fixed directly to the buildings structure, which due to lack of brackets results in lower cost of subframe. It can also be used as a second horizontal layer fixed to vertical L and T profiles for narrow cladding panels.

RW2E profile

RW2E is a top hat profile designed for short outreaches. It is fixed directly to the buildings structure, which due to lack of brackets results in lower cost of subframe. It can also be used as a second horizontal layer fixed to vertical L and T profiles for narrow cladding panels.

RW2A profile

RW2A is a top hat profile designed for short outreaches. It is fixed directly to the buildings structure, which due to lack of brackets results in lower cost of subframe. It can also be used as a second horizontal layer fixed to vertical L and T profiles for narrow cladding panels.

KWRK profile

KWRK is used for fixing non standard cladding panels. 4 mm thick “leg” increases the resistance and stiffness of the profile allowing it to be used as a support for heavy panels made of stone or concrete. Its box like shape allows all three sides to be used as a support at the same time.

KWRC profile

KWRC is a C shaped profile used as a support in middle part of cladding panels. It’s held by KWE element as part of threaded rod system. 40 mm grooved front surface area is wide enough to use adhesive systems. Side parts at the back of the profile increase its stiffness.

KWRP profile

KWRP is a T profile used at connection of two cladding panels. It’s held by KWE element as part of threaded rod system. 120 mm wide grooved front surface area allows for greater tolerance of joint location and enables the panel fixing to be 45 mm from its edge. Side parts at the back of the … Czytaj więcej

KWF3 profile

KWF3 is a decorative profile used at the edges of cladding panels and covering them.