KWRK is used for fixing non standard cladding panels. 4 mm thick “leg” increases the resistance and stiffness of the profile allowing it to be used as a support for heavy panels made of stone or concrete. Its box like shape allows all three sides to be used as a support at the same time.
KWRC is a C shaped profile used as a support in middle part of cladding panels. It’s held by KWE element as part of threaded rod system. 40 mm grooved front surface area is wide enough to use adhesive systems. Side parts at the back of the profile increase its stiffness.
KWRP is a T profile used at connection of two cladding panels. It’s held by KWE element as part of threaded rod system. 120 mm wide grooved front surface area allows for greater tolerance of joint location and enables the panel fixing to be 45 mm from its edge. Side parts at the back of the … Czytaj więcej
KNW4 is a C profile used mainly in corner sections. It can be used to fix 3 panels each in different orientation as well. For example as multi dimensional decorative elements or as part of balcony partition.
KWN3 is a corner profile used mainly with KG1 corner bracket. Profiles 116 mm long “leg” enables large adjustment of facade outreach. With this profile two cladding panels in corner sections can be fixed to the buildings structure in strong and safe manner. Panels fixing points are at the right distance from their edges as … Czytaj więcej
KCL is an L profile used to support middle part of a cladding panel. Glass and quartz sinter panels are hanged on it with additional elements. The hanging elements are inserted in profiles guiding channel. The guiding channel makes the installation easier and increases resistance to horizontal loads.Special socket for gaskets is located on the … Czytaj więcej
KCT is a T profile used at the connection of cladding panels. Glass and quartz sinter panels are hanged on it with additional elements. Hanging elements are inserted in profiles guiding channels. guiding channels make the installation easier and increase resistance to horizontal loads. Special sockets for gaskets are located on sides and in the … Czytaj więcej
KWRZ profile is used to hang cladding panels. Continuous bars are fixed directly to the wall (interiors) or to vertical profiles (exteriors). Smaller pieces of the same profile are fixed to the cladding panel but are rotated by 180 degrees. Socket in the upper part of the profile is used for a nut that together … Czytaj więcej
KWRW profile is used to hang cladding panels. Continuous bars are fixed directly to the wall (interiors) or to vertical profiles (exteriors). Smaller pieces of the same profile are fixed to the cladding panel but are rotated by 180 degrees. Socket in the upper part of the profile is used for a nut that together … Czytaj więcej
KWRG profile is used to stiffen window sills made of cladding panels. 160 mm long side of the profile enables fixing point of the cladding panel to be move further from the brackets axis.
