KRS1 bracket

KRS1 bracket is used to fix suspended ceilings. Threaded rod with two nuts holds the element in place. Gasket on the side of the bracket helps in levelling the cladding surface.

KWD bracket

U shaped KWD bracket is used to fix timber elements to buildings structure. It has both fixed and sliding slots on its sides. Timber elements can be up to 50 mm wide.

KG1 bracket

KG1 bracket is used on edges of the walls. Two neighbouring cladding panels can be fixed perpendicularly to one profile. Less elements are used that way. This solution, used instead of L profile to connect cladding panels, is much stiffer and more resistant and meets requirements of cladding panels manufacturers.

KW4 PAS passive bracket

BSP KW4 PAS passive bracket has been designed with stricter regulations regarding thermal insulation parameter of exterior partitions in mind. Brackets have structural function and transfer vertical and horizontal loads to the main bearing structure of a building. KW4 PAS specially designed shape and materials used in production result in relatively high load capacity and … Czytaj więcej

KE2 bracket

KE2 bracket is used for fixing segmental facades. It is fixed to the front of the floor slab and consists of multiple elements. Segmental or element facades are easy and safe to install making the whole process much faster and cost effective. To reach the full potential of this system special guiding channels should be … Czytaj więcej

KE1 bracket

KE1 bracket is used for fixing segmental facades. It is fixed to the top of the floor slab and consists of multiple elements. Segmental or element facades are easy and safe to install making the whole process much faster and cost effective. To reach the full potential of this system special guiding channels should be … Czytaj więcej

K3 bracket

Unlike K1 and K2 brackets K3 is used to fix aluminium curtain walls from the top or the bottom perpendicularly. The beams are slid onto the brackets. It can also be used in locations where side/wall mounting is impossible, for example support structures for louvers on the roof.

KW1 EB bracket

KW1 EB bracket has very similar shape to standard KW1 bracket but is thinner (2-3 mm). It is used for lower loads as they are less resistant. Undoubtedly its advantage is low price.

KW3 PAS passive bracket

BSP passive brackets have been designed with stricter regulations regarding thermal insulation parameter of exterior partitions in mind. Brackets have structural function and transfer vertical and horizontal loads to the main bearing structure of a building. Specially designed shape and materials used in production result in relatively high load capacity and favourable thermal parameters at … Czytaj więcej

KW2 PAS passive bracket

BSP passive brackets have been designed with stricter regulations regarding thermal insulation parameter of exterior partitions in mind. Brackets have structural function and transfer vertical and horizontal loads to the main bearing structure of a building. Specially designed shape and materials used in production result in relatively high load capacity and favourable thermal parameters at … Czytaj więcej