KP1 extension piece

KP1 extension piece can be used on uneven surfaces in order to level the surface of ventilated facade or aluminium curtain wall. This solution should be chosen over ordering multiple sizes of brackets what makes the logistic and installation processes faster. The main and most obvious reason those elements are used is to extend the … Czytaj więcej

K3 bracket

Unlike K1 and K2 brackets K3 is used to fix aluminium curtain walls from the top or the bottom perpendicularly. The beams are slid onto the brackets. It can also be used in locations where side/wall mounting is impossible, for example support structures for louvers on the roof.

K2 bracket

K2 brackets are used to fix aluminium curtain walls in problematic sections such as corners and dilatations. The bracket transfer all the loads from facade to the main bearing structure of a building. Brackets allow for very precise adjustment of the facade in all three directions without the need to use additional pads or washers. … Czytaj więcej

K1 bracket

K1 brackets are used to fix aluminium curtain walls. The bracket transfer all the loads from facade to the main bearing structure of a building. Brackets allow for very precise adjustment of the facade in all three directions without the need to use additional pads or washers. They have very high resistance to horizontal and … Czytaj więcej