KP1 extension piece can be used on uneven surfaces in order to level the surface of ventilated facade or aluminium curtain wall. This solution should be chosen over ordering multiple sizes of brackets what makes the logistic and installation processes faster. The main and most obvious reason those elements are used is to extend the … Czytaj więcej
K2 brackets are used to fix aluminium curtain walls in problematic sections such as corners and dilatations. The bracket transfer all the loads from facade to the main bearing structure of a building. Brackets allow for very precise adjustment of the facade in all three directions without the need to use additional pads or washers. … Czytaj więcej
K1 brackets are used to fix aluminium curtain walls. The bracket transfer all the loads from facade to the main bearing structure of a building. Brackets allow for very precise adjustment of the facade in all three directions without the need to use additional pads or washers. They have very high resistance to horizontal and … Czytaj więcej
KWR6 is a reinforced T profile and part of BSP Floor to Floor or slab system. Together with K1 and K2 brackets the combined resistance and stiffness of the elements allow it to be fixed to floor slabs only and increases brackets spacing. It is mainly used for renovation of old buildings and to install … Czytaj więcej
