HDPE washer

HDPE washer clips onto the bracket and separates it from the buildings structure preventing from corrosion. It has very low thermal conductivity and minimizes so called “thermal bridges phenomenon”. Washers come in three sizes: 60, 120 (made of two 60 mm pieces) and 150 (made of 60 and 90 mm pieces) which cover full range … Czytaj więcej

PVC washer

PVC washer is placed under the bracket and separates it from the buildings structure preventing from corrosion. It has very low thermal conductivity and minimizes so called “thermal bridges phenomenon”. Washers come in two thicknesses 2 and 10 mm.

KWP2 support piece

KWW1 “foot” together with KWP2 support piece are used to strengthen subframe resistance to lateral forces and stiffen the system. They are used for greater outreaches and horizontal structure layout.

KRP profile

KRP is a system consisting of two profiles KRP1 and KRP2. They are used for balcony partitions made of HPL or glass panels invisible installation. Profiles shape has been optimised to minimise their weight, overall cost of the system and ease of use. KRP is not a load bearing element. The load bearing structure is … Czytaj więcej

KWE element

KWE element is part of the threaded rod system used for thermomodernnzation of existing objects. Threaded rod is screwed into two threaded holes in the middle part of the element. Using two “walls” of the element increases the stiffness of the connection. KWE elements hold either KWRP or KWRC profile. Side walls of the element … Czytaj więcej

KWS hanging element

KWS hanging element is used for installation of siding type panels. The upper part of the element pushes the panel after installation so there is no looseness and panels are not moved by wind.

KWH hanging element

KWH hanging element is used for invisible fixing with under-cut anchors. 4 mm thick walls make extremely resistant and enable installation of heavy panels made of stone or concrete. EPDM gaskets are placed in special sockets. In the upper part of the element threaded hole and M5 screw are used to level the panels.

KWK clip

KWK clip is used to fix ACP. It’s 1 mm thick and made of stainless steel. Clips are used for small panels and minor loads. Low price is definitely their advantage.

KWZ hanging element

KWZ hanging element is part of two systems – BSP KWRY and BSP KWH. In both cases KWZ element is inserted into KWRY profile. Two back walls of the element lock it in profiles cavity but enable installers to move it fairly easy along the profile.

KC5 hanging element

KC5 is a part of KCS system. It is used as a vertical middle fixing point for glass or quartz sinter cladding panels. Its shape matches the socket in KCT profile and therefore can be inserted there.